Going for a bike ride is an excellent way to exercise. The strain on knees and shins caused by running can be relieved by going for a ride. Traditional bikes like ten-speeds are often the first thought of most new riders, but there has been a strong surge towards recumbent bicycles. The design is different because they allow you to sit back and enjoy the scenery. Before your first ride, there are a few differences that you need to learn.
First, mounting and dismounting are different. You need to swing your leg forward instead of backward over the frame. If you swing the leg backward, you may hit the reclining seat and probably fall over.
Be sure to adjust the seat and handlebars before you take off. It might be common sense, but with this type of cycle, it is more important in order to use it to its full potential. The bike is designed for you to be able to sit back and not have to reach for things. Adjust your bike until the fit feels good and allows you to recline.
Make sure you put the brakes on when you start and stop. This type of bike is prone to fall over if you don't have a good sense of control. The first few times you use the cycle will be the most important while you learn the best way to get on and off.
With other bikes, people tend to work harder rather than using the gears. Use the gears to make it an easier ride. Make sure to set the cycle to a low gear to make starting an easy task.
There is some debate on how to set your pedal before starting. Some suggest 2 o'clock but a 12 o'clock position is best for beginners. This allows you to put one foot on the pedal to get a good strong start.
Use the reclining position to ride. The seats are made for you to be in a position where you can almost feel like you're not really exercising. You can just sit back and relax. In fact, you need to look up and forward, not at the ground, while going on your ride.
Push off with your pedal, not your foot. Many traditional rides begin by pushing off with the foot that is planted on the ground. With this type of ride, you are not in a strong position to push off with the ground foot. Instead, start pedaling and immediately move the ground foot to the other pedal to get going.
Stopping is more difficult at first. With other types of cycles, you put on the brakes and put one foot on the ground and lean the bike. With this one, you want to apply the brakes and plant both feet on the ground, almost standing up. Be sure to straighten the wheels or the bike may fall over.
This is one of the most enjoyable ways to go on a cycle ride. You can relax in the reclining position and once you get used to the differences you will find that you are not nearly as tired after a ride. You will usually end up going farther, on longer rides. You will also be able to enjoy the scenery since you are looking up instead of hunched over, looking at the ground.
First, mounting and dismounting are different. You need to swing your leg forward instead of backward over the frame. If you swing the leg backward, you may hit the reclining seat and probably fall over.
Be sure to adjust the seat and handlebars before you take off. It might be common sense, but with this type of cycle, it is more important in order to use it to its full potential. The bike is designed for you to be able to sit back and not have to reach for things. Adjust your bike until the fit feels good and allows you to recline.
Make sure you put the brakes on when you start and stop. This type of bike is prone to fall over if you don't have a good sense of control. The first few times you use the cycle will be the most important while you learn the best way to get on and off.
With other bikes, people tend to work harder rather than using the gears. Use the gears to make it an easier ride. Make sure to set the cycle to a low gear to make starting an easy task.
There is some debate on how to set your pedal before starting. Some suggest 2 o'clock but a 12 o'clock position is best for beginners. This allows you to put one foot on the pedal to get a good strong start.
Use the reclining position to ride. The seats are made for you to be in a position where you can almost feel like you're not really exercising. You can just sit back and relax. In fact, you need to look up and forward, not at the ground, while going on your ride.
Push off with your pedal, not your foot. Many traditional rides begin by pushing off with the foot that is planted on the ground. With this type of ride, you are not in a strong position to push off with the ground foot. Instead, start pedaling and immediately move the ground foot to the other pedal to get going.
Stopping is more difficult at first. With other types of cycles, you put on the brakes and put one foot on the ground and lean the bike. With this one, you want to apply the brakes and plant both feet on the ground, almost standing up. Be sure to straighten the wheels or the bike may fall over.
This is one of the most enjoyable ways to go on a cycle ride. You can relax in the reclining position and once you get used to the differences you will find that you are not nearly as tired after a ride. You will usually end up going farther, on longer rides. You will also be able to enjoy the scenery since you are looking up instead of hunched over, looking at the ground.
About the Author:
You can get a detailed overview of the things to consider when buying recumbent bicycles and view our selection of bicycles at http://www.utahtrikes.com/PROD-11617617.html right now.
Aucun commentaire:
Enregistrer un commentaire